Corrugated RSC (FEFCO 0201, JIS Z 1507), RSC (B), style 0203
Choose a style picture to open size and weight entry. On an RSC the outer flaps meet in the center. RSC (B) steps the width-panel scores and bites the cuts into the body. Style 0203 overlaps the outer flaps fully.
Folding cartons
Choose a style picture, then enter A (width), B (depth), and C (height) in mm. The values are the inside of the box, or the outside of the product. Styles are added on this screen from the carton dieline list.
2. Board suggestion
Enter size and weight, then press Suggest a board.
3. Edit the sizes
Choosing a board fills starting values for that caliper. Edit them to the plant standard. The dieline updates when you edit.
4. How it was calculated
Dimensions appear here after you choose a board.
Weight and board table
The starting bands are 1 kg or less, under 10 kg, and 10 kg or more. You can edit the limits and the rows. They are saved in this browser.
| Band | Flute | Caliper | Board | Note | Suggested |
|---|
3. Edit the sizes
After drawing, you can edit the numbers. Gray fields are calculated. White fields accept input. The drawing updates when you edit.
A number updates that symbol's bands and corners. Formulas H, I, and F-2 update with it. An empty G uses G:=A/2-5.
The base is A×B and the four walls are C. D is the ear height at the four corners of the side walls. E is calculated as tan(20°)×D.
The lid is A×B. Side bands are D, C−1, and C. Top and bottom bands are E, C−1, and C. F, Z, G, H, and I come from formulas.
The base is A×B. Side bands are E, C−t, D, and C. Top and bottom bands are F, C, D, and C+t. The outer bands start at 15 mm. G is rounded to an integer.
4. How it was calculated
Symbol results appear here after you draw.
Dieline
The dieline appears here after you choose a board.